Hydraulically operated Coil Turning Tilting Tables
Space-saving Type of Coil Tilting Table
The hydraulically driven coil turning tilting tables, offered by Seidel Handlingsysteme GmbH, mainly consist of a solidely welded machine body plus a very stable base. The hydraulically operated drive is done by big dimensioned hydraulic cylinders as per newest state of the art. This drive moves the tilting unit between horizontal and vertical final positions. During this movement the tilting unit is moved via 4 extremely stable hinges.
The tilting unit itself is welded out of precisely produced steel parts with additional reinforcers. One side of the tilting unit does have a prism for pick up of the coil in vertical position, the other side does have a horizontal plate, for pick up of a coil in horizontal position, lying on a pallet or on cross beams. Depending on the version of the coil tilting table, this side, in the middle, additionally can have a cut-out, so that the coil standing on the prism will be easily accessable for being taken away by crane or coil transport cart.
The distance between the prism and the plate, which is standing opposite to the prism within 90° angle, is big enough to put into or take out of this space a pallet or cross beams after having tilted the coil.
Small coils will be protected against dropping down by safety rods or optionally by safety swords.
The base of a hydraulically operated Coil Turning Tilting Table is positioned onto a turning base, with which the Coil Turning Tilting Table can do a 180° rotation during tilting. By this way it is achieved that for putting a coil onto the table and for taking away a tilted coil from the table one access side only will be needed. This is space-saving and additionally increases the work safety during tilting of the coil.
Hydraulically operated coil turning tilting tables are available for the complete range of coils, as standard versions up to 30 tons. As special versions we also can offer them for bigger coil weights. They are available for coil widths up to 1.500 mm as well as for 2.000 mm coil outside diameter. Coil turning tilting tables for bigger coil dimensions also can be offered upon request.
As far as a coil tilting turning table is equipped with a "Dead Man Control" (2-Hand-Control), it also can be used without safety fence. This saves space at place of erection. The maximum tilting / turning speed of a coil tilting turning table used with 2-Hand-Control as per safety regulations is more slowly than the speed allowed for the version with safety fence. The coil tilting turnng tables shown here are available with or without safety fence installation, as per cusomer's request.
If you will have questions regarding our coil turning tilting tables, we will be at your disposal at any time.
Please do not hesitate to contact us:
Seidel Handlingsysteme GmbH
Tel.: 0049 2156 419193
Fax: 0049 2156 4979325