Pneumatically operated Gripper Feeds

Series AV, customer-specific, for small and middle Material Square

 
The pneumatically operated gripper feeds of series AV are built for feeding of coil material with a material thickness of up to 2,0 mm.
The gripper feeds of series AV are, as you can see at the list below, available for processing of coil material with maximum material widths of 100 mm to 500 mm. The maximum possible feeding strokes, depending on the single model, are between 50 mm and 1.000 mm. 

Standard Configuration of the pneumatic Gripper Feeds of Series AV:

• Press mounting plate
• Manual height adjustment + - 100 mm by long holes
• Valve for opening of gripper for piloting function
• Manual adjustment of stroke length (in case of stroke lengths bigger 600 mm
  the maximum adjustable area is 600 mm)

Available Options:

• Protection housing for the gripper feed
• Machine stand with 4 feet, recommended for stroke lengths bigger 400 mm
• Maintenance unit for compressed air
• Plastic coated grippers for delicate materials
• Non-driven straightening device for material widths 260 / 300 / 500 mm


Let us have the requirement for the gripper feed searched by you. Basing on the listed standard versions plus optional accessories we can configurate your individual gripper feed. Any further adoptions, if requested, we would like to check and realise for you.
 

Please contact us by phone or email.

Tel.: 0049 2156 419193
Fax: 0049 2156 4979325
eMail: info@seidel-handlingsysteme.de

pedestrian tug units with lifting hydraulics Werkzeughandling small sized_pay off reels Werkzeughandling heavy_load_bearing_turners coil transport vehicle with prism pedestrian_transport_solution_PTT3_with_pivot_bearing compact_strip_feeding_lines car_for_coil_transport_with_carrying_bolt Coilverarbeitung motorised_double_decoilers blank stack turners pallet_trucks_type_2